Best 12 Ways to Fix Laptops Cannot Connect to WiFi {In 2024}

Fix Laptops Cannot Connect to WiFi – This is a veritably common problem that occurs on laptops, especially Windows 10.

Generally, this happens when you try to connect to a WIFI network or hotspot and Windows 10 also says there’s an error.

Fix Laptops Cannot Connect to WiFi

1. Reinstall Network Adapter To Overcome Laptop Cannot Connect to WIFI

A network appendage makes your connection go to a network. However, it means that the commodity is wrong with your network appendage, If you see the “ Can not connect to this network ” warning.

The easiest way to break this Can not connect to this network problem is to remove and reinstall your network appendage.

Follow the easy way below to reinstall the network appendage.

1. Press WindowsXP.
2. Select Device Director from the list that will appear later.
3. When you click and open Device Director, also please select Network Adapter.
4. Once you see the network appendage, simply right-click on it or one of the appendages you’re using to connect to the current wifi and go to the appendage settings.
5. Also, click Uninstall and click OK to finish.

2. Disable IPv6

1. The problem” Windows 10 can not connect to this network” can also arise due to your network configuration. In this case, you should take a look at the IP network protocol settings and make sure they’re correct. still, you can fluently disable your IPv6 network protocol, If you feel uncomfortable and hysterical to ameliorate IP protocol settings. To do so, just follow the easy way below.
2. Open Windows Settings by pressing Windows crucial.
3. also, elect Network & Internet> Network and participate in Center

   

4. Find the access type of internet connection that you’re presently using.
5. also, click the WIFI that you’re presently using.

   

6. This will open the connection status window where you can see a lot of information and configuration options there.
7. Find the parcels button and click it to go to the coming screen.
8. Now find Internet Protocol interpretation 6( TCP/ IPv6) and uncheck it.
9. So now you have impaired IPv6 and can renew your computer to apply the new settings.

3. Update Laptop Network Driver Cannot Connect to WIFI

Since the problem that Windows 10 shows is about the network( WIFI, hotspot), it could just be caused by an outdated network appendage motorist.

In this case, the easiest result to fix the error is to simply modernize the network of motorists.

To modernize motorists, you need a motorist train. You can download the rearmost motorists for your network appendage on your laptop manufacturer’s website.
You can search a lot on Google according to the type of laptop you’re presently using. veritably easy to find.

Because I’m using an Acer Aspire V5- 431 type laptop, I only searched for the applicable motorist for my Acer laptop on Google. So should you.

Go to the laptop manufacturer’s website and hunt for your laptop model. Once you find your laptop model there, simply head over to the runner and download the motorist train.

Now move the train to your Windows 10 computer( not connected to WIFI) and simply modernize your network motorist.

It should only take 10 twinkles as long as you have the rearmost motorists. Make sure to install the specific motorist for the network appendage laptop model on your PC.

4. Forget and Reconnect the Wireless Network

Occasionally, you can make this wifi not connecting problem go down easily. However, just forget about the network and register a new bone,

If you frequently see the problem of Windows 10 being unfit to connect to wifi. This will reset the network cache.

Follow the way below if you do not know how to do the below in Windows 10.

1. Open Windows Settings by pressing Windows crucial.
2. also, elect Network & Internet.
3. Now you have to look for WIFI settings and click on them.
4. Scroll down and you’ll see a list of known networks.
5. Just Elect your current wireless network.
6. Click the Forget option to reset the network.
7. Now reconnect to the same network to register a new network.

5. Disabling and Reactivating Your Wireless Adapter

Another easy way to fix this laptop not being suitable to connect to wifi is to disable and enable your network appendage. Easy and ineluctable this system can frequently break these crimes.

Follow the way below for an easy companion on how to do this on a Windows 10 laptop.

1. Open Windows Settings by pressing Windows crucial.
2. also, elect Network & Internet> Network and participating Center.
3. Find appendage settings and click on Change Adapter Settings.
4. Now look for your network connection( Wireless Network) on the coming runner.
5. Right-click and from the dropdown menu, select Disable.
6. After opting for Disable, you can right-click and click Enable again.

6. Network Adapters Use the Same Type of Security

To cover your data, wireless connections are equipped with certain types of security similar to WPA2- PSK( AES) or WPA- PSK( AES).

frequently times you have to use a certain type of security to make the network work. So it’s important that your computer and wireless appendage have the same type of security.

To ensure that both your bias has the same type of setting, you can follow the simple way below.

1. Open Windows Settings by pressing Windows crucial.
2. also, elect Network & Internet> Network and participating Center.
3. Click on the Manage Wireless Networks option.
4. Once you’re on the Manage Wireless Networks runner, detect your wireless network.
5. Now right-click on the network and select Properties.
6. This will bring up a new settings runner where you can change the security settings for your current network.
7. Go to the Security Settings tab and make sure to select a security type analogous

   to your wireless router.

8. still, just try a different one until you find one that matches the wireless appendage If you aren’t sure what kind of security your appendage uses.
9. Eventually, click OK to save the settings.

7. Adding Connections Manually

When you witness that your laptop can not connect to wifi or a communication “ you can not connect to this network ” appears, it means you have some kind of connection problem.

This could arise from a misconfigured WIFI appendage. Then, you can add a connection manually to avoid not being suitable to connect to a Wi-Fi network.

1. Open Windows Settings by pressing Windows crucial.
2. also, elect Network & Internet> Network and participating Center.
3. Now click on Set Up A New Connection Or Network from the settings you see.
4. In the coming window, you can choose to connect to the network manually.
5. Find the right-hand option, click on it, and also enter the requested information about your networks similar to a security key, network name, and security type.
6. After you have entered all the required information, you can click Coming to complete the wizard.

8. Changing the Wireless Network Mode, Laptop Cannot Connect to the WIFI

Occasionally the error reported is’ Windows 10 can not connect to WIFI’, which means your WIFI router may have a problem. You can change the network appendage mode to fluently break this problem.

To change the router network mode, just follow the way below.

1. Open Windows Settings by pressing Windows crucial.
2. also, elect Network & Internet> Network and participating Center.
3. Click on Change Adapter Settings.
4. Now find your wireless on the coming runner.
5. Right-click on it and select Properties from the menu.
6. When the parcel window opens, click the Configure button.
7. Now open the Advanced tab from the configuration runner.
8. elect the Wireless mode from the list that appears on this runner.
9. In the coming window, simply change the value of the wireless mode so that it matches the mode on your WIFI router.

9. Edit your Network Adapter Channel Width

Windows may report a “ laptop can not connect to wifi ” error when the channel range of your network appendage is causing the problem. You can acclimate the channel range to fix the error.

Follow the way below for detailed instructions.

1. Press Windows crucial S( Hunt).
2. Type in Network and Participating Center, and please click to open it.
3. On the coming runner, click Change appendage Settings.
4. Now you can find the Wireless Adapter.
5. Click on it and go to Wireless Adapter parcels.
6. elect the Advanced tab.
7. elect the channel range 802.11 and change the value to 20 MHz.

10. Install the Driver Manually

One further step you can take is to manually install the network appendage motorist.

1. Open the Device Director.
2. Find your Network appendage and right-click on it.
3. From the dropdown menu, simply elect Update Motorist Software.
4. Now click on Browse my Computer to find the motorist software.
5. In the coming window, click Let me pick from a list of device drives on my computer.
6. Make sure that Show compatible tackle is not checked.
7. Find your laptop’s network appendage type and elect the motorist you want to install.
8. stay for the motorist to install and also renew your computer for the changes to take effect.

11. Using the Command Prompt

Now if none of the below has helped so far, it’s time to go to the command prompt and fix the problem from there. Follow the easy way below to fix the problem.

1. Press WindowsXP.
2. From the list, select Command Prompt.
3. You’ll see a command prompt window now.
4. Now enter the following commands, only one on each line, and make sure to press Enter after each line you enter.
   • Ipconfig / release
   • Ipconfig / renew 
5. Renew your laptop for the changes to take effect.

12. Change The Network Adapter Laptop Cannot Connect To Wi-Fi

Now that we’ve reached the end of our laptop not connecting to a Wi-Fi troubleshooting companion this is the last step you can take to fix the problem.

still, the only result is to replace your WIFI appendage, If nothing has helped so far and you’re still seeing network crimes.